Starting Parameters
- The first question was how to convert the electrode input
into input.
- It came every .1ms. So, I averaged over 100 (10 ms) to get the value
for one cycle.
- A sample input was 300mV. We converted this into .3 input
units.
- The second question was how to measure spikes.
- With no input the voltage hovered around -65 mV.
- With input it went up to around -40 mV and then rapidly
increased to positive values around 40mV, then again rapidly
decreased to around -55mV.
- The spike was measured from the first point it crossed from negative
to positive.
- We also had some biological data that Decay (D) was around 1.25.
